Engine Details • PONTIAC 396CID (6.5L) GAS • 1965–70
Models
Acadian, Beaumont, Laurentian, Parisienne, Strato-Chief
Liters
6.5
CID
396
Fuel / Delivery
GAS / CARB
Cyl.
8
Version
-
VIN
E, Y
Desc.
-
Bore
4.09'' (104.3mm)
Stroke
3.77'' (95.7mm)
Head
OHV
Asp.
N
Misc.
Big Block Chevrolet (Inc Truck)
Available Part Categories
Please select to update the part list below:
Camshaft High Performance for PONTIAC 396CID (6.5L) GAS • 1965–70
34 parts found
| Part No. | Description | Quantity | Specs |
|---|---|---|---|
| E-1007-P | 1 | ||
| E-1064-P | 1 | ||
| E-1066-P | 1 | ||
| E-1070-P | It is necessary to machine a 3/16" wide x 7/64" deep groove in the center of the rear cam journal or the I.D. of the rear cam bearing when using this cam in early blocks with no oil groove in the rear cam bore. | 1 | |
| E-1142-P | It is necessary to machine a 3/16" wide x 7/64" deep groove in the center of the rear cam journal or the I.D. of the rear cam bearing when using this cam in early blocks with no oil groove in the rear cam bore. | 1 | |
| E-1143-P | 1 | ||
| E-1170-P | It is necessary to machine a 3/16" wide x 7/64" deep groove in the center of the rear cam journal or the I.D. of the rear cam bearing when using this cam in early blocks with no oil groove in the rear cam bore. | 1 | |
| E-1171-P | It is necessary to machine a 3/16" wide x 7/64" deep groove in the center of the rear cam journal or the I.D. of the rear cam bearing when using this cam in early blocks with no oil groove in the rear cam bore. | 1 | |
| E-1176-P | It is necessary to machine a 3/16" wide x 7/64" deep groove in the center of the rear cam journal or the I.D. of the rear cam bearing when using this cam in early blocks with no oil groove in the rear cam bore. | 1 | |
| E-1206-P | 1 | ||
| E-1207-P | 1 | ||
| E-1215-P | 1 | ||
| E-1218-P | 1 | ||
| E-1219-P | 1 | ||
| E-1234-P | Retro-Fit, Hyd. Roller, For Use in Early Blocks with Std. Hyd. Cam. | 1 | |
| E-1235-P | Retro-Fit, Hyd. Roller, For Use in Early Blocks with Std. Hyd. Cam. | 1 | |
| E-1236-P | Retro-Fit, Hyd. Roller, For Use in Early Blocks with Std. Hyd. Cam. | 1 | |
| E-1237-P | Retro-Fit, Hyd. Roller, For Use in Early Blocks with Std. Hyd. Cam. | 1 | |
| E-1238-P | Retro-Fit, Hyd. Roller, For Use in Early Blocks With Std. Hyd. Cam. | 1 | |
| E-1795-P | 1 |